THE BEAST - Reverse Stainless Steel Grab Bar WINGITS®


  • Eliminate the need for structural blocking
  • Guaranteed to NEVER Loosen
  • Waterproof and Fireproof
  • Rated up to 800 lbs. in drywall and tile
  • Handles vector forces 360 degrees
  • Used to install WINGITS® Grab Bars
  • Proudly made in the USA, the SRGBW40 Reverse Stainless Steel Grab Bar WINGITS® exceeds ADA Criteria. 2010 ADAAG and 2009 ANSI Standards. For the last 15 years, millions of Grab Bars have been successfully installed with WINGITS® Grab Bar Fastening system without a single issue.

    The SRGBW40 is specified and/or approved in healthcare, government, institutional and commercial markets – including every major hotel chain throughout North America.

    The SRGBW40 is 100% waterproof utilizing 3M's VHB tape. It is rated up to 800 lbs. in drywall and tile and in 1/4" fiberglass tub surrounds. When installing the GBW40 into Ceramic Wall Tile, Plaster or Marble, use the Industrial Grade Carbide APACHE200™ drill bit for quick, precise holes, 1.25" hole required. The SRGBW40 was designed for 2" x 4" hollow walls and wall substrates from .25" - 1.5" thick.
    Please click here to download the Installation guide. [.pdf format]

    Commercial Grab Bar Fastening System Installation Guide
    WINGITS® Grab Bar Fastening Systems Exceeds Building Codes For Grab Bars In The Following Wall Substrates:
    • 5/8” Drywall - Painted or Wallpapered
    • 1/2” or 5/8” Drywall with Tub Surrounds
    • 1/2” or 5/8” Drywall with Tile, Marble or Stone
    • 1/2” or 5/8” Drywall with any Panel Types including Fiberglass, Faux Marble, Acrylic and Plastics
    • Multiple Layers of Drywall, Plaster and Lathe
    • 1/4” Acrylic/Fiberglass Tub Surrounds
    • Most Wall Panels, All Masonry Type Boards

    Before You Install: ADAAG recommends Grab Bars be installed horizontally 33” - 36” from the floor.
    • Verify the length of the grab bar by measuring from the inside of one flange to the outside of the other.
    • To ensure adequate clearance, a stud finder should be used to verify there are no studs within the area where the WingIts® will be installed. Make sure that there is at least 1.5” away from the edge of the stud. If concerned, drill a pilot hole and insert a piece of wire in the shape of an “L” - twirl the wire to make sure there is nothing in the way. Once inserted, each wing assembly will spring open almost 3” in diameter
    • Tools Required: Screwdriver, 1.25” Drill (our APACHE200 rated at 200 holes in ceramic wall tile)

    A dedicated sales associate or customer service representative is available during normal business hours to answer any questions you may have. Our knowledgeable team can assist on topics ranging from product specifications to installation guidance. Your satisfaction is our primary concern. Please feel free to call or email us, we are here to help.

    Phone: 732.869.4466
    Toll-Free: 877.894.6448
    Fax: 732.869.9474

    Sales Support:
    Customer Support:

    Hours of Operation:
    Monday - Friday
    8:00 AM - 6:00 PM EST