• FOR SALES AND SERVICE

    734.550.9701

  • The #1 specified bath accessory lines in hospitality.



  • previous page slider shape

PLATINUM™ Stainless Steel Grab Bar (WPGB5)

PLATINUM™ Stainless Steel Grab Bar (WPGB5)

Available Finishes
  • Polished Stainless Steel
  • Satin Stainless Steel
  • Custom Finish Option
Available Sizes
  • 12"
  • 16"
  • 18"
  • 24"
  • 30"
  • 32"
  • 36"
  • 42"
  • 48"
Available Outside Diameter
  • 1.25"
Available Flange Cover Accents
  • Band
  • Bevel
  • Halo
  • Hex
  • Rope
  • Taper
  • Tri-step

 

PLATINUM™ Stainless Steel Grab Bar Benefits:

  • Beautiful hand casted Stainless Steel designer threaded flanges in 7 unique designs create the ultimate aesthetic
  • Threaded flanges tighten around the included rubber O ring forming a 100% waterproof seal
  • Meets and exceeds all building codes, Americans with Disabilities Act (ADA) Compliance Regulations, 2010 ADAAG and 2017 ANSI standards
  • Exceeds minimum requirement for pull-out in any direction – 250 lbs. for ADA and 300 lbs. for Commercial Building Code
  • Rated up to 800 lbs.
  • 18/8 (304-series) Stainless Steel tubing (18-gauge, 1.2mm thick)
  • Flanges bolt on to the bottom of the tubing with (2) Hex bolts
  • Length measured center flange to center flange – overall length is size + 3”
  • Deeper flange cover to accommodate WingIts®, if used
  • Mounting flanges are 3” (75mm) in diameter, 3/32” (2.5mm) thick, HeliArc welded to the tubing
  • Mounting flanges have 5 holes for attachment to WingIts® or adequate blocking
    • Typical triangular shape pattern and (2) slotted holes
    • Slotted mounting holes provide “Speed” installation with WingIts® grab bar fasteners
    • Provides .25” of play when installing with WingIts®
  • Snap-on flange covers are 22 gauge (0.8mm) drawn Stainless Steel, 3” (76mm) in diameter and .375” (10mm) in height
  • 6 Stainless Steel wood screws included
  • Provides 1.5" wall clearance from wall to inside of tubing when installed
  • Custom sizes available upon request
  • 100% compatible with WingIts® grab bar fasteners GBW and RESGBW

Description

Installation Guide

Files

For Access to WingIts Pricing and Files Including Cad Design Please click and Fill Out our File/Information Request Contact Form

WingIts File/Info Request

CAPTCHA